How do I connect my smart wall switch to my smart devices?

Have more questions? Submit a request

The Calex Smart Wall Switch can be paired with smart bulbs and smart power plugs.

Make sure the lamps or power plugs are on and receiving a good Wi-Fi signal. This is the only way to connect the lamps to the remote control. The remote control itself is not visible in the app.

 

Pairing:

  1. Make sure it the lamp or power plug is connected to the Calex app.
  2. Turn off the power of the lamp or power plug (by cutting the power) and wait 5 seconds
  3. Turn on the lamp or power plug again and wait 5 seconds
  4. Press and hold the reset button on the Smart Wall Switch for 5 seconds until the indicator flashes
  5. Then press the ON button of the Smart Wall Switch for 5 seconds, a paired lamp should now flash 2 times and a paired power plug automatically turns off/on.
  6. Repeat steps 1 through 4 to pair more smart devices


Disconnect:

Press and hold the ON button of the Smart Wall Switch for 5 seconds until the indicator flashes. The Smart Wall Switch is then disconnected.
In case you have paired the Smart Wall Switch with multiple lamps and or power plugs, they will all be disconnected. If you only want to disconnect one lamp or power plug then make sure that the other lamps and power plugs are completely switched off by disconnecting their power supply.

Articles in this section

Was this article helpful?
3 out of 22 found this helpful
Share

Comments

0 comments

Please sign in to leave a comment.